Wrought Iron Architectural Metalwork
Designed & manufactured in the U.K
By: Chris Topp & Co Ltd, North Yorkshire
Tel: 01845 501415
The sections shown are indicative of rolled sections which are supplied in imperial sizes, but by no means all that are available in puddled wrought iron.
Rolled wrought iron available in:
Other sections not shown on the list may be produced by rolling, if in sufficient quantity, or by forging in smaller quantities. We are able to provide sizes larger than those shown, up to a maximum of about 4" square, round or flat, or in exceptional circumstances even larger. There is generally a restriction on the available lengths of these larger sections.
By forging, we can produce mouldings to your pattern. A tooling charge is generally applicable to these special sections.
Special forgings in puddled wrought iron are possible up to a maximum weight of about 100lbs. Or in exceptional circumstances even larger.
Charcoal iron is more typical of pre -19th century irons, or what has come to be now as Swedish Iron". It is available by special request, particularly in sheet form, which lends itself admirably to repousee work
Certain sections of rolled, moulded handrail sections are available only in mild steel. Please ask for further information.
We sell wrought iron in imperial sizes (feet and inches) in order that it will fully match historic ironwork. For those of you that are too young to remember or have not used the system an explanation is outlined below -
1000mm = 39.36 inches
25.4mm= 1 inch
12 inches = 1 foot
Glossary: inch, in (abbreviation), " (also means inch), inches (plural)Foot, ft (abbreviation), (also means foot), feet (plural)
Billet ready for rolling into clients chosen section size Stock ready to be despatched.
